How To Hang a Neon Sign? Complete DIY Guide

How To Hang a Neon Sign? Complete DIY Guide

My Store Admin

Your LED neon sign is out of the box, your chosen wall is waiting, and the only thing left is to give your space the glow it deserves.

Unlike complicated installations, LED neon signs are made for simple home setup with a low-voltage plug-in adapter, a pre-drilled acrylic backboard, and a supplied screw kit included for secure mounting.

All you need is to mark the right position and drill a few holes to fix your neon sign in place.

This guide will explain to you the complete process of how to hang a neon sign on your wall with confidence. 

What Do You Need Before You Start? 

1. Gather everything you need before starting the installation.

2. Check that your neon box includes the mounting hardware. These include the following:

  • Screws

  • Wall plugs

  • Washers

  • Adapter

3. Keep these basic tools ready:

  • Measuring tape

  • Level

  • Drill

  • Screwdriver

4. Test The Sign Before You Start

Plug in your LED neon sign and make sure it turns on before drilling any holes.

5. Check For Any Damage

Make sure the sign works properly and has no damage from shipping.

6. Make Sure The Wall Is Strong

Choose a wall that can safely support the weight of the sign.

7. Check The Power Socket

Ensure the power cable can easily reach the nearest power socket.

8. Keep The Sign Safe

Keep the sign in its box between installation steps to protect the acrylic backboard from scratches and damage. LUXNEON signs are shipped with tight bubble wrapping, white foam, and a fiberboard. This ensures there’s no scratches during transit.

Lux Neon Sweet Dreams neon sign above a baby crib in a pink nursery. Two women in pink dresses hold a newborn.

Where Should The Sign Go? 

Choosing the right location makes your custom LED neon sign look its best and perform well. Follow these steps to place your sign perfectly-

1. Mount the sign at eye level if people will mainly view it while standing.

2. If the sign is going above a sofa, bed, reception desk, or other furniture, place it slightly higher.

3. Make sure the sign is close enough to a power outlet and avoid using extension cords across walkways, as they can be unsafe and make the space look untidy.

4. A plain, solid-coloured wall helps the neon glow stand out better than a patterned wall.

5. Turn off the power before starting the installation and keep the sign unplugged throughout the installation process.

Following these safety steps helps ensure a smooth and safe installation.

How Do You Hang The Neon Sign?

Now it's time to mount your LED neon sign on the wall. Take your time with this step to make sure the sign is straight, secure, and safe.

1. Hold the sign against the wall in the chosen position.

2. Use the pre-drilled holes in the acrylic backboard to mark the drilling spots with a pencil.

3. Ask someone to help hold the sign if it is large or heavy.

4. Use a level to check that the markings are straight before drilling.

5. Drill the holes at the marked spots. You get screws along with each purchase of LUXNEON signs.

6. Insert the supplied wall plugs if you are mounting the sign on brick, or concrete.

7. Place a rubber washer over each hole in the acrylic backboard.

8. Insert the screws and tighten them until the sign is secure.

9. Do not overtighten the screws, as this may damage the acrylic backboard.

10. Attach the decorative end caps over the screw heads for a neat finish.

11. Check the sign with a level one last time to make sure it is straight and firmly fixed.

How Do You Connect The Power And The Test the Sign?

After the sign has been mounted, follow the steps-

1. Connect the Sign

  • Connect the LED neon sign to the controller.

  • Plug the controller into the power adapter.

  • Connect the adapter to the wall power outlet.

  • Make sure all connections are secure before turning on the power.

2. Set Up the Remote or Dimmer

Pair the remote or dimmer if your sign includes one and keep the controller in an easy-to-reach place for future adjustments or battery replacement. You can get one for your sign at just rupees 400 extra.

3. Manage the Power Cable

  • Route the power cable neatly to the nearest power outlet.

  • Run the cable straight down the wall where possible.

  • Hide it behind furniture or use a stick-on cable raceway for a clean look.

4. Test the Sign

  • Turn the sign on at full brightness.

  • Check that the entire sign lights up evenly.

  • If the sign flickers, switch it off and check that all cables are seated securely.

  • If any section stays dark, do not open or repair the sign yourself.

  • Contact customer support if you notice any damage or lighting issues.

5. Final Check

Step back a few metres and view the sign from a normal distance and

make sure the sign is level and the lighting looks even.

What Mistakes Should You Avoid When Hanging A Neon Sign? 

A few mistakes can affect both the appearance and safety of your LED neon sign. 

1. Always use wall anchors that are suitable for the sign’s weight, as weak anchors can loosen over time and cause the sign to fall. 

2. Never skip the level check before drilling, since even a slight tilt becomes obvious once the sign is illuminated. 

3. Test the sign by plugging it in before installation so any transit damage is identified before holes are drilled in the wall. 

4. When securing the sign, place the supplied rubber washer between the screw heads and the acrylic backboard to prevent cracks or pressure marks, then finish with the decorative end caps. 

5. Avoid running extension cords across walkways, as they can lead to unnecessary tripping and make the appearance look untidy. 

6. If installing the sign outdoors or in a bathroom, first confirm that its moisture rating is suitable for that environment. 

Frequently Asked Questions-

  1. Can I hang a neon sign without drilling?

No. A backboard-mounted LED neon sign should be fixed to the wall using the supplied screws and wall plugs. They are designed to support the sign’s weight safely, while adhesive strips or tapes are not a reliable long-term mounting solution.

  1. Do I need an electrician to install an LED neon sign?

No. Most LED neon signs simply plug into a standard power outlet and can be installed without an electrician. You only need one if you require a new power outlet or any electrical wiring work.

  1. How high should a neon sign be on the wall?

Mount it at eye level or slightly above for the best visibility. If it’s being installed above furniture such as a sofa, bed, reception, or display desk, place it a little higher so the design remains centred and easy to see even from different angles.

  1. Can I hang a neon sign outdoors or in a bathroom?

Yes, but only if the sign is specifically rated for the outdoors or damp locations. Indoor LED neon signs should not be installed where they may be exposed to moisture or rain.

Every LUXNEON sign is supplied with a pre-drilled acrylic backboard and a complete screw mounting kit, giving you the same hardware used throughout this guide for a secure and lasting installation.

Additional Reads:

How is a neon sign made?

Back to blog